DIY printed (stenciled) felt

9 Apr

DIY Printed Felt Lets face it felt is a pretty amazing medium to work in but  it does have its limitations chief among them is the lack of pattern.

Polyester patterned felt is available in very limited prints but what if you’re a felt purist or your imagination refuses to be constrained by commercially available choices? You have felt visions, nay dreams which you cannot ignore. You seem like a  free-thinker, I like that. So I’m here to help you… and I brought freezer paper!

Prepare to have your mind blown…unless you’ve seen this before in which case settle back down and don’t ruin it for the rest of the class! Printed Felt Sheets Tutorial

You will need:

Freezer Paper AKA grease proof paper – Printer sized if you plan to use a printer

X-acto Knife or Scalpel & Cutting Board

Acrylic Paint & Textile Medium or fabric paint.

Wool or Wool Blend felt

Sponge Brush

A Vision (or templates)

Create stencil.

Cheveron Template American Felt and Craft - The Blog

The first step is to create a stencil to work with. You will need to be able to cut away the area you plan to paint so simple outlines work best. Making the areas to be cut away a darker color will help keep your head from spinning when you try to figure out parts to cut later. Anything the freezer paper covers will stay the color of the felt. Whatever you cut away will become the print. 

Stenciling on felt

The templates for these 6 patterns are posted free through our store if your interested in any of these styles.

Freezer paper in rolls

Freezer paper can be bought in printer sized sheets or in rolls at the grocery store in the sandwich bag and plastic wrap isle. It is not the same as parchment, butcher, or waxed paper. The thinner, grocery sold freezer paper (rolled) is more opaque and will allow for easy tracing, but it also tears more easily and is a bit more cumbersome to cut.

Printer sized freezer paper

Printer sized freezer paper sheets (quilters paper) , thicker and sturdier than rolled freezer paper.

If you are printing onto the paper I highly recommend buying pre- cut freezer paper meant for printers. Paper sold on rolls even when cut down tends to hold its curl and can jam up printers. Plus commercially available freezer paper sheets (often called quilters paper) is often thicker and adheres to the felt better.

To print on freezer paper make sure that you print onto the matte (feels like regular paper) side NOT  the shiny side. Print your design out onto the freezer paper sheets making sure to leave space around the edges to keep the paper intact after you get done cutting.  This is exactly the way your pattern will look when it is stenciled so don’t get all fancy and print your letters backwards or anything. Viola!

feltstencil Now the real fun begins!  Lay your stencil down onto your cutting surface – You may want to tape it down to prevent shifting. Keep your cuts clean any cracks or extra cuts might result in areas you didn’t want getting painted onto your felt

And, we’re cutting…and we’re cutting. Freezer paper stencil

Repeat, Repeat, Repeat!

Congrats your freezer paper sheet is now officially a stencil!

 Set your iron to wool lady friend because it’s time to make some magic! iron

Line up your stencil on the felt sheet shiny side down. The shiny stuff (technical term) will melt slightly and create a seal which won’t leave residue on your felt when you’re ready to peel it off. This temporary seal will need to hold a clean line so make sure to press firmly as you go paying close attention to edges and corners.  NO STEAM! textile paint Textile medium (also called fabric painting medium) is not optional if you are using acrylic paint. It magically transforms dull flaky, acrylic paint into a fabulous permanent washable fabric paint.

How to print on felt

The textile medium also helps the paint become  more pliable which prevents, cracking, lifting, and fading.  Mix the paint with textile medium 2: 1. or as instructed. Mix well.

 Unless you get crazy with your paint and saturate through the entire thickness you shouldn’t need anything under your felt but this can be a messy process so you will need to protect your work area, a poster board is perfect for this. Making a felt stencil with freezer paper- tutorial Using a sponge brush paint over the stencil. One coat should be fine but if you want to do a second make sure your first layer is fully dry. Wood grain stenciled felt using freezer paper- American felt and Craft the blog

Remove the freezer paper after the paint is set but before the felt is fully dry or cured.

(The paint on the paper is dry but the paint on the felt is still moist.) This is much easier than letting the paint fully set.

Use freezer paper to create stencils for felt. - American Felt and Craft- The Blog

They will be dry to the touch pretty quickly but allow them to cure overnight.

To set the paint you will need to iron over the dried paint on the wool setting.

Use as you would any felt.

Check out what we made with the wood-grain felt!

Check out what we made with the wood-grain felt!

 Now what to do with these guys… I am thinking coasters, maybe a notebook cover?

Printed Felt sheet tutorial

Any suggestions?

*Those of you who did not properly prepare to have your minds blown, I am sorry but I did try to warn you . DIY stenciled felt sheets

* Handy Tips from your handy tipster:

* The textile medium worked fine on the synthetic felt but the freezer paper wasn’t able to make a solid bond on the appropriate heat settings for synthetics. It may have sealed at a higher temp but this isn’t Myth-busters and I risk my iron for no man!

* This technique didn’t work on the bamboo felt, the composition of the felt is so soft that it adheres a little too well.

* Painting with a sponge brush in light layers will help keep the lines clean.

* Don’t mess up- Paint is forever so be careful! If you didn’t over saturate your felt you should be able to flip it over and give it another try on the reverse side.

* Mixing textile medium with acrylic paint  is a way to get a large range of color choices without having to make an investment in each color of fabric paint.   Especially since you may only need a small amount paint. It also allows for easy custom tinting.

* You can also paint directly on the felt, which you would only do if you were better at it than I am, which isn’t that hard see…

Painting on Felt - American Felt and Craft - The Blog

The size of a sheet of freezer paper is pretty close to felt sheets we sell at American Felt and Craft and many other places so you know exactly what will fit.

Freezer paper is also great for cutting out templates with precision! (More on this next week!)

Happy Crafting!


American Felt and Craft

16 Responses to “DIY printed (stenciled) felt”

  1. Felted Chicken (@FeltedChicken) April 9, 2013 at 4:30 pm #

    FANTASTIC! Thanks Andie! You always come up with the BEST projects! It’s kinda like… DUH, I know & have all these supplies, but never put it all together like this!!

  2. The Deliberate Mom April 11, 2013 at 2:01 pm #

    This is AMAZING! I can’t wait to try this out!!! Thank you, thank you, thank you!

  3. Nicole H. April 11, 2013 at 3:35 pm #

    The link for the templates didn’t work for me – I love this idea! Thanks!

  4. Rachel April 12, 2013 at 12:58 pm #

    Great idea! What a fantastic way to make felt even more versatile! I would love to link to your tutorial if you didn’t mind.

  5. Karen May 19, 2013 at 3:28 pm #

    Oh. My. Gosh. I *love* this! How wonderfully creative and inspirational–thank you!

  6. d. August 26, 2013 at 11:18 pm #

    Love it! Just what I needed for my project. Thank you!

  7. conny December 9, 2013 at 7:36 pm #

    Reblogged this on Studio Conny and commented:
    yang membatasi semuanya adalah imajinasi, bukan?

  8. geets anne December 18, 2013 at 3:35 pm #

    dat ga ik uitpoberen ik werk graag met vilt maar het is eentonig altijd dezelfde kleurtjes danku !!!!

  9. chrissycorrado November 22, 2014 at 7:48 pm #

    This is awesome! Are the templates reusable? Or are they pretty much done after you peel them off from the felt? Thanks!

    • AmericanFeltandCraft November 29, 2014 at 5:36 pm #

      In the smaller detailed templates the paint the lines are too warped to be ironed down a second time. But if you were very careful there is no reason they wouldn’t be re-usable a second time.

      • chrissycorrado November 29, 2014 at 6:25 pm #

        Thank you!

        Sent from my iPhone


  10. Alex December 27, 2017 at 8:57 pm #

    does this stay on well, waterproof and all?


  1. Colorful Printed Felt | feeds - April 27, 2013

    […] patterned felts around, so a solution to that is to print your own using freezer paper stencils. Click here for the tutorial. […]

  2. The Digby Pillow – 15 Minute Felt Beagle Pillows | American Felt and Craft- The Blog - August 4, 2013

    […] DIY printed felt […]

Leave a Reply

Fill in your details below or click an icon to log in: Logo

You are commenting using your account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s

%d bloggers like this: